SIP-Fail2ban

提供: VoIP-Info.jp
2010年12月30日 (木) 09:57時点におけるTakahashi (トーク | 投稿記録)による版 (Asterisk用の定義ファイルを作る)
移動先: 案内検索

fail2ban

ログファイルとiptablesを利用したファイアウォールの一種。Brute Forceアタックの対策に使いやすい。

http://www.fail2ban.org/
http://sourceforge.net/projects/fail2ban/

動作条件

pythonとiptablesが必要。yum install python iptablesなどで入れておいて下さい。

インストール

まずSFからfail2banをダウンロードし、展開します。

tar jxvf fail2ban-0.8.4.tar.bz2

展開したディレクトリでインストールを実行します。

cd fail2ban-0.8.4
python ./setup.py

スタートアップ・スクリプトをコピーしておきます(CentOSなどRedHat系の場合の例)。

cp files/redhat-initd /etc/init.d/fail2ban

設定

Asteriskのログフォーマットを変更する

Fail2banはそのままではAsteriskのログの日付を認識できないため、Asteriskのログフォーマットを変更します。
/etc/asterisk/logger.confを編集し、日付のフォーマット変更を行います。
[general]セクションにある

dateformat=%F %T

のコメントを外すか、もしこのエントリがなければ記述します。設定を変更したら、Asteriskを再起動するか、loggerモジュールのリロードを行って、変更を有効にします。これによりAsteriskのログの日付形式が以下のように変わりますので、確認してください。

[2010-12-30 09:25:25] NOTICE[17537] chan_sip.c:.....

Asterisk用の定義ファイルを作る

/etc/fail2ban/filter.d ディレクトリに asterisk.conf という名前で以下のようなファイルを作ります。ここで指定したメッセージがBAN基準として使われるメッセージとなります。

Asterisk 1.8系の場合

# Fail2Ban configuration file
#
#
# $Revision: 250 $
#

[INCLUDES]

# Read common prefixes. If any customizations available -- read them from
# common.local
#before = common.conf


[Definition]

#_daemon = asterisk

# Option:  failregex
# Notes.:  regex to match the password failures messages in the logfile. The
#          host must be matched by a group named "host". The tag "<HOST>" can
#          be used for standard IP/hostname matching and is only an alias for
#          (?:::f{4,6}:)?(?P<host>\S+)
# Values:  TEXT
#

failregex = Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - Wrong password
            Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - No matching peer found
            Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - Username/auth name mismatch
            Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - Device does not match ACL
            Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - Peer is not supposed to register
            Registration from '.*' failed for '<HOST>(:[0-9]{1,5})?' - Not a local domain

# Option:  ignoreregex
# Notes.:  regex to ignore. If this regex matches, the line is ignored.
# Values:  TEXT
#
ignoreregex =

Asterisk 1.6とそれ以前の場合

# Fail2Ban configuration file
#
#
# $Revision: 250 $
#

[INCLUDES]

# Read common prefixes. If any customizations available -- read them from
# common.local
#before = common.conf


[Definition]

#_daemon = asterisk

# Option:  failregex
# Notes.:  regex to match the password failures messages in the logfile. The
#          host must be matched by a group named "host". The tag "<HOST>" can
#          be used for standard IP/hostname matching and is only an alias for
#          (?:::f{4,6}:)?(?P<host>\S+)
# Values:  TEXT
#

failregex = Registration from '.*' failed for '<HOST>' - Wrong password
            Registration from '.*' failed for '<HOST>' - No matching peer found
            Registration from '.*' failed for '<HOST>' - Username/auth name mismatch
            Registration from '.*' failed for '<HOST>' - Device does not match ACL
            Registration from '.*' failed for '<HOST>' - Peer is not supposed to register
            Registration from '.*' failed for '<HOST>' - Not a local domain

# Option:  ignoreregex
# Notes.:  regex to ignore. If this regex matches, the line is ignored.
# Values:  TEXT
#
ignoreregex =

Asterisk 1.8とそれ以前ではログのホスト部分にポート番号を含む、含まないの違いがあるためfailregexの記述を変える必要がありますので注意してください。この部分に合致するメッセージが、ログファイルに現れたならばBAN基準になりますので注意して記述します。これ意外にも、引っかけたいメッセージがある場合にはそれも記述するとよいでしょう。

BANのアクションを作成する

ここではTCP/UDPの5060ポート、つまりSIPだけをBAN対象としたいためアクションをSIP用に作成します。 /etc/fail2ban/action.d で以下のようにしてアクションを作成します。
まず

cp iptables-allports.conf iptables-sip.conf

を行って、全ポート用のアクションをコピーします。次に iptables-sip.conf を編集し、以下のようにBANとUNBANのエントリを修正します。

# Option:  actionban
# Notes.:  command executed when banning an IP. Take care that the
#          command is executed with Fail2Ban user rights.
# Tags:    <ip>  IP address
#          <failures>  number of failures
#          

-p udp と --dport 5073 を actionban と actionunban に追記します。

fail2banの設定ファイルを修正

/etc/fail2ban にある jail.conf ファイルの最後に以下を追加します。

[asterisk-iptables]

enabled  = true
filter   = asterisk
action   = iptables-sip[name=ASTERISK, protocol=all]
           sendmail-whois[name=ASTERISK, dest=root, sender=fail2ban@example.net]
logpath  = /var/log/asterisk/messages
maxretry = 5
findtime = 600
bantime = 604800
  • action

BAN処理のアクションを定義します。この例ではiptables-sipを実行します。その後、sendmail-whois で BANしたIPアドレスのwhois情報を dest= で指定された宛先に送ります。このとき使用されるメールのFrom:はfail2ban@exampleになりますので、適切なものに書き換えます。

  • logpath

Asteriskのログファイルへのパスを記述します。

  • maxretry

何回以上失敗したらBANするかの指定です。

  • findtime

この時間内にmaxretryで指定した回数以上失敗するとBANします。上の例では600秒(10分)の間に、5回以上の失敗があった場合にはBANされます。

  • bantime

ここで指定された期間がBAN期間になります。指定は秒数です。上の例では 60x60x24x7=604800、つまり1週間になります。