En/Microclient JR DX

MCJRDX-1.jpg

Specifications

CPU : Xcore86 DX 1GHz(Vortex A9120 933MHz) -> http://www.vortex86dx.com/
Memory : 256MB (512MB version will available at 2009Q2)
VGA : XGI Volari Z9s http://www.xgitech.com/products/products_2.asp?P=23
ROM : AMI BIOS
Storage: Compact Flash X 1,microSD X 1
HDD : 2.5" PATA X1 can be installed.
LAN : 100Mbps Fast Ethernet(PXE boot,WOL) RDC R6040
Dimensions: 115x115x35mm 505g(without HDD)
Price: Start from $140(Single unit.Without S&H. Available from NORHTEC)

Description

MCJRDX-2.jpg
microSD on front side. Bottom of CF slot.
Marked as "SD" but "microSD".

MCJRDX-3.jpg
Rear view. This unit without RS232C

MCJRDX-4.jpg
Inside Top view.

Storage Configuration

Single microSD,CF slots on Front side.You can use micro SD and CF same time.
2.5" HDD can be installed inside.(But mini PCI model,You can't install HDD.)

  • Default Configuration.
microSD : IDE Primary Master.
CF/2.5HDD : IDE Secondary Master.
  • Swith CF Priority
There is a "Slide Switch" located inside of CF Slot.
MCJRDX SS1.jpg
Change this switch to "Slave",CF Slot will work as IDE Secondary Slave.
MCJRDX SS2.jpg
This switch can be access from CF Slot.
To Change HDD priority, You must use "Jumper" setting on HDD itself.
  • To select boot device, Press [F11] at power on screen.
or use BIOS setup menu to change boot priority.