En/Microclient JR DX

Specifications

CPU : Xcore86 DX 1GHz(Vortex A9120 933MHz) -> http://www.vortex86dx.com/
Memory : 256MB (512MB version will available at 2009Q2)
VGA : XGI Volari Z9s http://www.xgitech.com/products/products_2.asp?P=23
ROM : AMI BIOS
Storage: Compact Flash X 1,microSD X 1 HDD : 2.5" PATA X1 can be installed.
LAN : 100Mbps Fast Ethernet(PXE boot,WOL) RDC R6040
Dimensions: 115x115x35mm 550g(without HDD)
Price: Start from $140(Single unit.Without S&H. Available from NORHTEC)

Description

microSD on front side. Bottom of CF slot.
Marked as "SD" but "microSD".


Rear view. This unit without RS232C


Inside Top view.

Storage Configuration

Single microSD,CF Slot on Front side.
2.5" HDD can be installed.(But mini PCI model,You can't install HDD.)

• Default Configuration.

microSD : IDE Primary Master.

CF/2.5HDD : IDE Secondary Master.

• Swith CF Priority

There is a "Slide Switch" located inside of CF Slot.

To change this switch to "Slave",CF Slot will work as IDE Secondary Slave.

This switch can be access from CF Slot.

To change HDD priority, You must use "Jumper" setting on HDD itself.

• To select boot device, Press [F11] at power on screen.

or use BIOS setup menu to change boot priority.