「En/Microclient JR DX」の版間の差分

提供: VoIP-Info.jp
移動先: 案内検索
(新しいページ: '320 px<br> ==Specifications== CPU : Xcore86 DX 1GHz(Vortex A9120 933MHz) -> http://www.vortex86dx.com/<br> Memory : 256MB (512MB version will available ...')
 
(Storage Configuration)
30行目: 30行目:
 
:There is a "Slide Switch" located inside of CF Slot.
 
:There is a "Slide Switch" located inside of CF Slot.
 
:[[画像:MCJRDX_SS1.jpg|240 px]]
 
:[[画像:MCJRDX_SS1.jpg|240 px]]
:To change this switch to "Slave",CF Slot will work as IDE Secondary Slave.
+
:Change this switch to "Slave",CF Slot will work as IDE Secondary Slave.
 
:[[画像:MCJRDX_SS2.jpg|240 px]]
 
:[[画像:MCJRDX_SS2.jpg|240 px]]
 
:This switch can be access from CF Slot.
 
:This switch can be access from CF Slot.
:To change HDD priority, You must use "Jumper" setting on HDD itself.
+
:To Change HDD priority, You must use "Jumper" setting on HDD itself.
 
*To select boot device, Press [F11] at power on screen.
 
*To select boot device, Press [F11] at power on screen.
 
:or use BIOS setup menu to change boot priority.
 
:or use BIOS setup menu to change boot priority.

2009年1月27日 (火) 23:35時点における版

MCJRDX-1.jpg

Specifications

CPU : Xcore86 DX 1GHz(Vortex A9120 933MHz) -> http://www.vortex86dx.com/
Memory : 256MB (512MB version will available at 2009Q2)
VGA : XGI Volari Z9s http://www.xgitech.com/products/products_2.asp?P=23
ROM : AMI BIOS
Storage: Compact Flash X 1,microSD X 1 HDD : 2.5" PATA X1 can be installed.
LAN : 100Mbps Fast Ethernet(PXE boot,WOL) RDC R6040
Dimensions: 115x115x35mm 550g(without HDD)
Price: Start from $140(Single unit.Without S&H. Available from NORHTEC)

Description

MCJRDX-2.jpg
microSD on front side. Bottom of CF slot.
Marked as "SD" but "microSD".

MCJRDX-3.jpg
Rear view. This unit without RS232C

MCJRDX-4.jpg
Inside Top view.

Storage Configuration

Single microSD,CF Slot on Front side.
2.5" HDD can be installed.(But mini PCI model,You can't install HDD.)

  • Default Configuration.
microSD : IDE Primary Master.
CF/2.5HDD : IDE Secondary Master.
  • Swith CF Priority
There is a "Slide Switch" located inside of CF Slot.
MCJRDX SS1.jpg
Change this switch to "Slave",CF Slot will work as IDE Secondary Slave.
MCJRDX SS2.jpg
This switch can be access from CF Slot.
To Change HDD priority, You must use "Jumper" setting on HDD itself.
  • To select boot device, Press [F11] at power on screen.
or use BIOS setup menu to change boot priority.