Asterisk FUSION

2009年12月22日 (火) 03:29時点におけるTakahashi (トーク | 投稿記録)による版 (新しいページ: 'AsteriskとFUSIONを接続する方法など<br> ==AsteriskとFUSIONの接続== FUSIONがAsterisk対応を正式に表明したため、堂々と繋ぐことができます。<...')
(差分) ← 古い版 | 最新版 (差分) | 新しい版 → (差分)
移動先: 案内検索











Welcome to the ADSL client setup.  First, I will run some checks on
your system to make sure the PPPoE client is installed properly...


Enter your Login Name (default root): GOLのアカウント(ユーザ名。@以降も必要)


Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): PPPoEを使うEthernetインタフェース

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
Enter the demand value (default no): 常時接続の場合は'no'


Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: プライマリDNSのアドレス
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: セカンダリDNSのアドレス


Please enter your Password: GOLのアカウントのパスワード
Please re-enter your Password: パスワードをもう一度


Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): ユーザがセッションを開始できるかどうか


Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2): 0 ファイアウォール設定。ここでは指定しない。あとで書く。

Start this connection at boot time

Do you want to start this connection at boot time?
Please enter no or yes (default no): ブート時にセッションを自動的に張るかどうか
Start this connection at boot time

** Summary of what you entered **

Ethernet Interface: 設定したインタフェース
User name:          設定したアカウント(ユーザ名)
Activate-on-demand: No
Primary DNS:        プライマリDNSのアドレス
Secondary DNS:      セカンダリDNSのアドレス
Firewalling:        NONE
User Control:       yes
Accept these settings and adjust configuration files (y/n)?  確認してOKならy